The best GTO treatment procedure

OK... this is just being realistic.

If you all want to make the best way to treat an engine with GTO is to the succeeding steps. Treat engine with 1 bottle of GTO 250ml. let it run and use it normally for the next 5,000 kms.

1.  After you reach 5,000kms. you may now drain your old oil... DNO NOT USE FLUSHING OIL TREATMENT! (The worse thing your engine can experience is to have that flushig oil inside it.)

2. DRAIN the old oil, using a high pressure air to push all the old oil out, let it drip to the last drop; Be sure to contain them in a resealable containers

3. CHANGE the filter with any original or genuine oil filter item.


5. When the engine is now ready;  treat if with GTO;

6. Now you're good for another 10K to 15K kms. Once you reach the next PMS, replace your oil filter alone. No oil change is necessary, just add GTO again after the filter is replaced.

7. Upon reaching 40K km, you need to check your oil again, and replace it with fresh one, along with a new filter. Then repeat the GTO treatment.  Just repeat this cycle for every 40K kms interval.

1 comment:

Patrick Bouldin said...

On what to do with the old oil - I wrote a blog on "re" refining oil - a great example. I am not affiliated with that company in any way but feel it's a great solution -
here's my blog:

Carbon Footprint Calculator

Notes to ponder

NASA claims that the government could slow down worldwide global warming by cutting down on soot emissions. Studies by NASA show that cutting down on soot would not only have an immediate cooling effect, but would also put a stop to many of the deaths caused by air pollution. When soot is formed, it typically travels through the air absorbing and releasing solar radiation which in turn begins to warm the atmosphere. Cutting soot emissions would be an immediate help against global warming, as the soot would quickly fall out of the atmosphere and begin to cool it down.

Cutting back on soot emissions would buy us time in our fight against global warming. Soot is caused by the partial burning of fossil fuels, wood and vegetation. Soot is known to contain over forty different cancer causing chemicals, and a complete cut would offer untold health benefits worldwide.

Environmental conservation has always been a topic for lengthy discussions, but up until recent times, global warming and climate changes were vague subjects, with no hard proof. Not surprisingly, the previous lack of attention to these issues have created a very gloomy outlook on our future. So, considering all this, what could be the biggest contributor to climate changes through global warming? Transportation - the man-made iron horses, flying machines and sea monsters, so to speak.

The question we have now is how green is our transportation? The majority of the worlds' vehicles are fueled by oil (petrol, diesel and kerosene). Even if they rely on electricity, the stations used to generate this electricity use fossil fuels for power! Excluding vehicle manufacture, transportation is responsible for 14% of the artificially created greenhouse emissions, mostly carbondioxide.

Automobiles, trains and planes are all responsible for this problem, but cars are the highest impact-makers. They release approximately six times more carbondioxide than a plane and seven times more than sea vessels.

What is Air Pollution?

Air pollution is somewhat difficult to define because many air pollutants, at low concentrations, are essential nutrients for the sustainable development of ecosystems. So, air pollution could be defined as:A state of the atmosphere, which leads to the exposure of human beings and/or ecosystems to such high levels or loads of specific compounds or mixtures thereof, that damage is caused. With very few exceptions, all compounds that are considered air pollutants have both natural as well as human-made origins.

Air pollution is not a new phenomenon; in Medieval times, the burning of coal was forbidden in London while Parliament was in session. Air pollution problems have dramatically increased in intensity as well as scale due to the increase in emissions since the Industrial Revolution.